Last modified: October 16, 2020 7:07 PM This part of the Mario Kart Live: Home Circuit guide will address troubleshooting issues such as kart issues (kart won’t spin), connection issues, etc. The kart does not turn correctly If the kart does not turn correctly, it may be clogged with debris or hair. Here’s how to clean it. Remove the rubber wheels. Make sure you put them to the side as the front wheels are different from the rear ones. If you mix them up, don’t worry! Just make sure the smaller wheels are on the back in the front and the larger ones in the back. Take a pair of tweezers and use it to remove the hair. Replace the rubber wheels. Make sure they are fully lit, covering the yellow, otherwise the kart will not roll properly The laps are not counted correctly If your laps are not counted correctly, you may have made your turns leading to the gate too tight. Don’t position it like that. Configure it like this. Create wider turns so that it enters the door in a straight line. Connection error Connection errors can occur if the kart moves too far from the switch. Nintendo recommends a distance of 5 meters. While I might have gone further than that if there are connection issues, try using the switch in portable mode and sitting in the center of the course.